Table of Contents
Advertisement
Troubleshooting
Check
Is surround sound being output?
Interference or distortion appear in WirelessHD images
Check
Are signals being received within the Wire-
lessHD transmission range?
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Is the reception too low?
Problems with USB storage devices
Slideshow does not start
Check
Is the USB storage device using a security
function?
Other problems
No audio, or the audio is too low
Check
Is the audio cable connected correctly?
Is the volume too low?
Is it connected with an HDMI cable?
When audio is output from the projector's speakers, it is also
output from the projector's Optical Audio-Out port in 2ch stereo.
When you want to use surround sound, we recommend con-
necting directly to the source device using an HDMI cable.
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
tings - WirelessHD - Reception
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
Settings - WirelessHD - Reception
s
You may not be able to use USB storage devices that incorporate
security functions.
Try disconnecting the cable from the Audio (L-R) port, and then
reconnecting.
Adjust the volume so that you can hear the audio.
If no audio is output when connecting via an HDMI cable, set the
connected equipment to PCM output.
87
Remedy
Remedy
p.54
s
p.54
s
p.71
Remedy
Remedy
s
Set-
s
p.71
p.28
Hide quick links:
Advertisement
Table of Contents
