Switching The Screen Between Wide And Zoom (Aspect) - Epson EH-TW6100W User Manual

Adjusting the Image
Choices when projecting 2D images
Mode
Auto
Dynamic
Living Room
Natural
Cinema
c
Auto cannot be set when the projector is suspended from the ceiling.
Choices when projecting 3D images
Mode
3D Dynamic
3D Cinema

Switching the Screen Between Wide and Zoom (Aspect)

You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projection
screen.
The available Aspect varies depending on the image signal currently being projected.
a
Press the
EH-TW6100W
c
You can make settings from the
configuration menu.
Aspect p.68
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
Images for the HDMI connection are displayed using the same resolution as the original image source.
Sets the color mode automatically according to the surroundings.
The optimum image quality is set according to the brightness of the room detected by
the sensor (auto color adjustment function).
Ideal for use in a bright room. This is the brightest mode, and reproduces shadow tones
well.
Ideal for use in a bright room. Images are clear and sharp.
Ideal for use in a dark room. We recommend performing color adjustment in this mode.
p.6
s
Ideal for watching movies and concerts in a dark room.
For use when projecting 3D images. Images are bright and sharper than 3D Cinema.
For use when projecting 3D images.
button.
EH-TW6100/EH-
TW5950
Signal -
s
Application
Application
b
Use the
select the setting name, and then
press the
selection.
c
Aspect may not be available
depending on the type of signal.
30
buttons to
button to confirm the