Problems When Projection Starts; The Projector Does Not Turn On; Problems With The Interactive Features (Eb-585Wi/Eb-575Wi Only); Cannot Draw On The Projected Screen - Epson EB-585W User Manual

Problem Solving

Problems when Projection Starts

The Projector Does Not Turn on

Check
Did you press the [t] power button?
Are all of the indicators off?
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this
Is the Control Panel Lock set to Full Lock?
Is remote control operation restricted?

Problems with the Interactive Features (EB-585Wi/EB-575Wi only)

Cannot Draw on the Projected Screen

Check
Has pen calibration been performed correctly?
Is Pen Mode set to PC Interactive?
Press the [t] power button to turn the power on.
The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
s "Getting Ready to Project" p.44
Check the breaker and so on to ensure power is being supplied.
does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Press the [t] power button on the remote control. If you do not want to use Control Panel Lock, change the setting to
Off.
s Settings - Control Panel Lock p.122
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.122
Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes
the position of the pen correctly.
Also, calibrate the system again if you notice any discrepancy in positioning.
s "Pen Calibration" p.71
Set Pen Mode to PC Free Annotation from the Configuration menu.
s Extended - Easy Interactive Function - Pen Mode
Remedy
Remedy
p.126
152