EAB70003
Clutch lever
The clutch lever is located on the left handle-
bar, and the ignition circuit cut-off system is in-
corporated in the clutch lever holder. Pull the
clutch lever to the handlebar to disengage the
clutch, and release the lever to engage the
clutch. The lever should be pulled rapidly and
released slowly for smooth clutch operation.
(Refer to the engine starting procedures for a
description of the ignition circuit cut-off sys-
tem.)
EAB80001
Shift pedal
This motorcycle is equipped with a constant-
mesh 5-speed transmission.
The shift pedal is located on the left side of the
engine and is used in combination with the
clutch when shifting.
1. Shift pedal
EAB90001
Front brake lever
The front brake lever is located on the right
handlebar. Pull it toward the handlebar to ap-
ply the front brake.
EAB90101
Rear brake pedal
The rear brake pedal is on the right side of the
motorcycle. Press down on the brake pedal to
apply the rear brake.
4-6
N. Neutral