PRI: This stands for "prime". If the engine
has been allowed to run out of fuel, turn
the lever to the "PRI" position to send
fuel directly to the carburetors. This will
make starting easier. However, be sure
to turn the lever to the "ON" position (or
"RES" if you have not refuelled yet) af-
ter the engine has started.
EAC20502
Starter "CHOKE"
Starting a cold engine requires a richer air-fuel
mixture. A separate starter circuit supplies this
mixture.
Move in direction a to turn on the starter.
Move in direction b to turn off the starter.
1. Starter "CHOKE"
4-9