Yamaha Virago XV250P Owner's Manual page 78

1. Tension bar
3. Nut (tension bar bolt)
5. Brake adjuster
3. Remove the brake adjuster and brake
rod from the brake cam lever.
4. Loosen the locknuts and chain adjusters
on each side.
2. Cotter pin
4. Brake rod
1. Axle nut 2. Cotter pin
4. Adjuster 5. Alignment marks
5. Remove the axle nut cotter pin and the
axle nut.
6. Pull out the wheel axle and remove the
wheel assembly.
EUU05600
NOTE:
You do not have to disassemble the chain in
order to remove or install the rear wheel.
7-36
3. Locknut