Disconnecting/Connecting The Flexible Card Wire - Sony DXC-D35 Service Manual

2-11. Disconnecting/Connecting the Flexible Card Wire

2-11. Disconnecting/Connecting the Flexible Card Wire
The flexible card wires are used among the CN-1294 board and the MB board, the MB board and the TG
board. Be careful not to bend these wires. This shortens the wire life.
Disconnecting
1. Turn off the power of the camera.
Type A
(between the MB board and CN-1294 board.)
2. Disconnect the flexible card wire.
Type B
(between the MB board and TG board)
2. Slide portion A in the direction of the arrow and disconnect the flexible card wire.
Type A
Contact surface
Connecting
m
. Be careful not to insert the flexible card wires obliquely.
. Check that the contact surface of the flexible card wire is not soiled with dust.
Type A
1. Insert the flexible card wire as far as it will go into connector with the contact surface of the wire
faced to the board.
Type B
1. Slide portion A in the direction of the arrow and insert the flexible card wire as far as it will go into
connector with the contact surface of the wire put down.
2. Slide portion A in the opposite direction of the arrow and lock.
2-16
Type B
A
Contact surface
A
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1