Attaching The 4-Type Or 5-Type Viewfinder - Sony DXC-D35 Service Manual

2-10. Attaching the 4-type or 5-type
Viewfinder
An optional 4-type viewfinder (DXF-40 series) or 5-type
viewfinder (DXF-50 series) can be attached in accordance
with the following procedures:
Parts Required (sold separately)
Name
. Accessory shoe kit
Shoe
Plate spring
Stop screw
Screw K3 x 6 (4 pcs)
*1
Screw K3 x 12 (4pcs)
*1 : These screws are not used.
Attaching Procedure
1. Remove a screw and remove the blind pate.
2. Tighten the shoe with four screws (K3 x 6).
3. Fix the plate spring in the shoe in the arrow direction
and tighten it with the stop screw.
Blind
Screws
plate
K3 x 6
Stop screw
Plate
spring
DXC-D35/D35WS(UC)
DXC-D35P/D35WSP(CE) V1
Sony Part No.
A-8274-968-B
3-664-218-0X
3-664-228-0X
3-664-213-0X
7-682-247-0X
7-682-250-0X
Screws
K3 x 6
Screws
K3 x 6
Shoe

2-10. Attaching the 4-type or 5-type Viewfinder

4. Fit the guide plate in the shoe and tighten the fixing
ring.
5. Connect the VF connection cable.
VF connection cable
(20pin)
Shoe
Stop screw
Fixing ring
Guide plate
2-15