1-10. Connecting/Disconnecting the Flexible Card Wire
This unit uses the two types connectors for the fl exible card wires.
m
. Be very careful not to fold the fl exible card wire. Life of fl exible card wire will be signifi cantly short-
ened if it is folded.
. The fl exible card wire has the conductor side and the insulated area. If the conductor side and the insu-
lated area are connected in the wrong direction, the circuit will not function.
. Insert the fl exible card wire straight.
. Ensure that the conduction surface of the fl exible card wire is not contaminated.
Type A
Disconnecting
Open the latch of the connector in the direction of arrow A to unlock, and disconnect the fl exible card wire.
Connecting
1. Insert the fl exible card wire fi rmly as far as it will go, with the insulated side up.
2. Close the latch of the connector in the direction of arrow B to lock.
Disconnecting
Insulated
side
Flexible card wire
Type B
Disconnecting
Open the latch of the connector in the direction of arrow C to unlock, and disconnect the fl exible card wire.
Connecting
1. Insert the fl exible card wire fi rmly as far as it will go, with its insulated side facing front.
2. Close the latch of the connector in the direction of arrow D to lock.
Disconnecting
C
Connector
PMW-EX1R
Latch
A
Connector
Insulated
Connecting
Flexible card wire
Insulated
side
Latch
Latch
Connecting
Latch
B
Connector
side
Flexible card wire
Flexible card wire
Insulated
side
D
Connector
1-19 (E)