Table of Contents
Advertisement
Fitting a VTR
5
Perform the first three steps in
"Fitting a VTR".
6
Screw the connection plate
(supplied with the grip for the
DVCAM camcorder) which
straddles the connection
between the camera head and
the DSR-1/1P. Also, tighten
the two screws in the shoulder
pad section. (See step 5 on
page 26.)
7
Screw the grip for the
DVCAM camcorder.
Attaching a camcorder grip to the PVV-3/3P
1
Perform steps 2 to 4 in "Fitting
a VTR".
2
If the viewfinder is attached,
adjust the viewfinder to the
full-forward position.
For details, see "Adjusting the
viewfinder position" on page 32.
28
Chapter 2 Fitting and Connections
Connection
plate
Grip for the DVCAM camcorder
3
Remove the grip's three
screws, then pull up the grip to
remove it.
4
Remove the PVV-3/3P's
shoulder strap fitting.
5
Screw the grip for the Betacam
camcorder.
Shoulder strap
fitting
Grip for the Betacam
camcorder
29
Chapter 2 Fitting and Connections
Hide quick links:
Advertisement
Chapters
Table of Contents
