Replacing The Lithium Battery - Sony DXC-D35 Service Manual

Replacing the Lithium Battery

1
Pull the upper part of the
battery cover (on the rear of
the camera head) forward and
turn the cover clockwise.
For detaching the VTR or camera
adaptor, see "Fitting a VTR" next
page.
2
Take out the lithium battery.
3
Reverse step 2 to insert a
replacement lithium battery.
Make sure that the + symbol
on the battery is facing you.
4
Close the battery cover.
24
Chapter 2 Fitting and Connections
Rear of the
camera head
Battery cover
Press down and pull out toward you.
Fitting a VTR
This section explains how to attach the DSR-1/1P to
the camera head. The method for attaching a PVV-3/
3P is similar.
1
Set the PRO 76-pin DIGITAL
connector on the DSR-1/1P.
(The camera connector on the
PVV-3/3P is PRO 50-pin.)
For details, see the operating
instructions for the DSR-1/1P.
2
Loosen the two screws and
remove the shoulder pad.
3
Align the projection on the
bottom of the DSR-1/1P with
the slot on the camera head.
Camera head
When replacing the camera head grip with a camcorder
grip, see "Using the Camcorder Grip" (page 27).
DSR-1/1P
Camera connector
(PRO 76-pin DIGITAL)
Screws
Slot
Projection
Groove
(continued)
25
Chapter 2 Fitting and Connections