Using A Headset - Lucent Technologies ISDN 970 User Manual

Using a Headset

You can use a headset with your ISDN 970 Telephone.
You must have enabled the headset feature as
described in the Installation and Setup Manual.
Unplug the handset cord from the handset jack on the
side of the telephone. Plug the headset cord into the
handset jack. DO NOT PLUG THE HEADSET CORD
INTO THE HANDSET.
To answer a call on the headset when you are NOT
currently on a call, press the button next to [REDIAL] ,
which has been assigned as the headset control button.
To answer a call on the headset while on a call, press
the flashing call appearance button. The original call
is placed on hold. To return to the original call, press
the original call appearance button, which is flashing
slowly.
To place a call on the headset, press the button next to
[REDIAL] , which has been assigned as the headset
control button.
To hang up a call on the headset, press the headset
970 ISDN Telephone
control button.
To switch to the speakerphone, press [SPEAKER] .
To switch back to the headset, press the headset control
button. (If the headset is enabled, M2 upper and lower
buttons are not available as memory buttons.)
30