Lucent Technologies ISDN 970 User Manual page 28

Set the Rate for Viewing Display
Messages.
You can use the softkeys to set the length of time the
display message stays on the screen. When you receive
your telephone, the rate is set at Medium (3 seconds),
but the rate can also be set to Slow (5 seconds) or Fast
(1 seconds).
Press [MENU] .
Press the softkey below OPTIONS.
The following display appears:
Options
CLOCK RING SCRN DONE
Press the softkey below SCRN. The following display
appears:
Screen Options
CONTRAST SCROLL DONE
Press the softkey below SCROLL.
Press the sofkey below your selection.
970 ISDN Telephone
Press the softkey below DONE.
Check the timing of the message to see if it fits your
needs. You can modify the rate as often as you like.
Assign One-Touch Memory Buttons
You can assign a telephone number to a memory button
so you can call that number by simply pressing that
button. The speakerphone will turn on and the number
will dial. There are 5 one-touch memory locations.
Enable the one-touch feature. (See Installation and
Setup.) The feature is ON by default.
To assign a one-touch memory button, press [MENU] .
Press the softkey below MEM.
Press the softkey below 1TOUCH.
Press the softkey below PROGRAM. The following
display appears:
Enter the desired phone number. Press the softkey
below CLEAR to erase the number, press the softkey
28
Enter phone #:
_
PAUSE QUIT