Lucent Technologies ISDN 970 User Manual page 19

you enter a G. Press it twice and you enter an H. Press
the 4 key three times and you enter an I. Pressing it a
fourth time enters a 4. Pressing it a fifth time enters a
G again.
You can enter a # or * at the beginning of or within the
name.
When you start to enter the name the screen changes.
Press the softkey below --> --> --> to enter the next letter. -->
-->
As you enter each letter of the name, that letter appears
on the screen until you press --> --> --> to move on to the
-->
next letter.
Press the softkey below <-- <-- to go back one space and <-- <--
<--
erase a letter.
When you have finished entering the name, press the
softkey below DONE. The following display appears:
Enter phone #:
_
970 ISDN Telephone
-->
PAUSE QUIT
Enter the telephone number for the name you have just
entered. You may enter up to 24 digits. A pause counts
as a digit.
To place a 1.5-second pause within the number press
the softkey below PAUSE. A pause will be inserted
into the directory entry and a comma will appear on the
display. Press the softkey below DONE when you
have finished entering the phone number.
Edit a Directory Entry
Press [MENU] .
Press the softkey below MEM.
Press the softkey below DIRCTORY.
Press until you see EDIT.
Press the softkey below EDIT. The display shows the
first names in the directory.
Press to page forward through the names in the
directory, or press to page backwards through the
names.
19