Wind Door Waving Angle Definition - AUX ASW-H09A4/SAR1DI Service Manual

LED 2 shinning times
⑴.outdoor temperature sensor abnormal
⑵.outdoor defrosting sensor abnormal
⑶.compressor venting temperature abnorma
⑷.compressor venting temperature too h
⑸.outdoor communication abnormal'
⑹.communicating with IPDU module abnormally
2
PROM data abnormal
⑺.E
⑻.IPDU abnormal; exceeding max turning value
⑼.IPDU abnormal; shaking
⑽.IPDU abnormal; off position
⑾.IPDU abnormal; accelerat
⑿.IPDU abnormal; G-TR short c
⒀.IPDU abnormal; position checking return
⒁.IPDU abnormal;
⒂.IPDU abnormal;
⒃.IPDU abnormal; compressor damaged
10. Wind Door Waving Angle Definit
(diagram 1) 48G(excluding 48G) below is
hanging air conditioner
1、 when connected to electricity wind door will appear to full closing, waving speed is 22°/s
2、 After turned on, wind
accordingly, when heating , it stops at (diagram 1) position 5, while refrigerating, it will return to
(diagram 1) position 2.
3、 wind door button on the remote control can be set to be free waving hand waving.
4、 when free waving, w
5, waving scope for refrigerating is 50°, (diagram 1) between 2 and 4, waving speed is
5、 when connected to electricity, and remote control does not set wind door to wave, the
waving angle will move to the position according to different models and fix position, for
example,,(diagram 1) position 2 is refrigerating model, (diagram 1) position 5 is heating
model, after 风机 starting up, wind door will recover to free waving; while remote control
set wind door as hand waving, the waving angle will not change all the time.
6、 wind door will close automatically, after being turned off and
working
7、 pressing enforcing starting button to go into the automatical model, after system choose
the model and start to work, wind door will open, and before this, wind door stops at
refrigerating base position.
8、 when being connected to electricity and model exchanging, wind swing will reset to the
direction of closing one time
9、 when heating is breeze, wind door is forced to horizontal position
waving angle for new production style E
possible reas
ing abnormal
ircuit
electricity sensing
compressor locked
door will full open first, then wave to the original position
aving scope for heating is 50°, such as
, when resetting indoor motor stops.
ons for faults
l
igh
ing abnormal
abnormal
ion
waving angle for electrical machine of E series
32
(diagram 1) between 3 and
indoor motor stops
wind door
5.5°/s