Intelligent Anti-Frost - AUX ASW-H09A4/SAR1DI Service Manual

For split wall mounted series r410a dc inverter
Table of Contents

Advertisement

b)、When 25 ≤Te
operates.If Te still at upper trend ,it should be Te<30
wind speed;
c)、When 30 ≤Te
d)、When Te≥38 ,indoor motor run at the
When Te go down:
a)、When Te≥34 ,indoor motor run at the
b)、When 28 ≤Te
c)、When 23℃<Te<28 ,indoor motor run at the lower wind speed;
d)、When Te≤23 ,indoor motor stop to run ;
When compressor stop to run:
a)、When Te go down and Te>25 ,indoor motor blow the lower wind speed;Or when
Te≤25 ,indoor motor shut down;
b)、When Te go up and Te≥28 ,indoor motor blow the lower wind speed;Or when Te
28 ,indoor motor shut down;
12、Compare to protect the Ta(Indoor temperature) at the heating mode
When Ta≥22 ,it's able to run at the heating mode and the highest working frequen
compressor is 50Hz;
When 22℃>Ta≥10 ,it's able to run at the heating mode and the the highest working
frequency of compressor is 70Hz;
When Ta<10 ,it's able to run at the heating mode and the the highest working frequency of
compressor is 80Hz;
13、Intelligent anti-frost
1、Condition for anti-frost:
When the outdoor sensor's at the good condition and meet the following condition,it start to
function:
1)When compressor run over 45min,mode change or shut down and the cumulate time
<30 ,indoor motor run at the lower wind speed as soon as it
<38 ,indoor motor run at the low wind speed;
<34 ,indoor motor run at the low wi
setting wind speed;
setting wind speed;
26
and indoor motor blow lower
nd speed;
cy of

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASW-H09A4/SAR1DI and is the answer not in the manual?

This manual is also suitable for:

Asw-h12a4/sar1di

Table of Contents

Save PDF