How To Buckle Your Baby Into The Car Seat - Peg-Perego Primo Viaggio Owner's Manual

How to Buckle Your Baby
This restraint uses the 5-point system
to secure your baby into the car seat.
See illustration on page 8.
1. Put your baby in the car seat. Bring the
two shoulder straps over your baby's
shoulders. Make sure the straps are not
twisted behind the backrest or over your
baby's chest. Insert both latch plates into
the buckle until you hear them click.
Pull on straps to make sure it is latched
securely. (Note: You may need to adjust
the shoulder height. See How to Raise or
Lower the Shoulder Straps on page 25
for instructions.)
2. Latch the two chest clips together.
into the Car Seat
23