How To Buckle Your Baby Into The Car Seat - Peg-Perego PRIMO VIAGGIO SIP ES 30.30 Owner's Manual

How to Buckle Your Baby into the Car Seat

This restraint uses a 5-point harness
system to secure your baby into the car
seat. See illustration on page
1• Push the red buckle button to
release the harness. Press and hold
the harness adjuster button while
pulling the shoulder straps out. Lay
the shoulder straps to the side to
make room for your baby.
2• Put your baby in the car seat with
their bottom and back flat against
the child restraint. Bring the two
shoulder straps over your baby's
shoulders. Make sure the straps are
not twisted behind the backrest or
over your baby's chest.
⇠ 28
PrimoViaggioSIP-ES_USA_30-30_FIU28 28
8.
10-03-2010 14:44:58