How To Buckle Your Baby Into The Car Seat - Peg-Perego PRIMO VIAGGIO SIP 30.30 Owner's Manual

This restraint uses a 5-point harness
system to secure your baby into the car
seat. See illustration on page 8.
1• Push the red buckle button to release
the harness. Press and hold the
harness adjuster button while pulling
the shoulder straps out undo the
chest clip (point 5). Lay the shoulder
straps to the side to make room for
your baby.
2• Put your baby in the car seat with
their bottom and back flat against
the child restraint. Bring the two
shoulder straps over your baby's
shoulders. Make sure the straps are
not twisted behind the backrest or
over your baby's chest.
28

How to Buckle Your Baby into the Car Seat