Peg-Perego PRIMO VIAGGIO Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Peg-Perego Manuals
  4. Car Seat
  5. Primo Viaggio
  6. Instructions for use manual

Peg-Perego PRIMO VIAGGIO Instructions For Use Manual

Hide thumbs Also See for PRIMO VIAGGIO:
Table of Contents

Advertisement

Quick Links

WARNING:
instructions in this manual. To avoid serious injuries to your child, follow the instructions carefully and
be sure to buckle your child at all times.
Weight limits in
rear-facing mode
with vehicle belt:
2.3 - 18 kg (5 - 40 pounds)
Weight limits in rear-facing
mode with UAS:
2.3 - 16 kg (5 - 35 pounds)
maximum height:
119 cm (47 inches)
Do not install or use this child restraint until you read and understand all
Weight limits in
forward-facing mode
with vehicle belt:
10 - 29.5 kg (22 - 65 pounds)
Weight limits in
forward-facing mode
with UAS:
10 - 18 kg (22 - 40 pounds)
maximum height:
125 cm (49 inches)
Instructions for use EN
FICA2203I348
Weight limits in
booster mode :
18 - 54 kg (40 - 120 pounds)
CA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRIMO VIAGGIO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Peg-Perego PRIMO VIAGGIO

Summary of Contents for Peg-Perego PRIMO VIAGGIO

  • Page 1 Instructions for use EN FICA2203I348 WARNING: Do not install or use this child restraint until you read and understand all instructions in this manual. To avoid serious injuries to your child, follow the instructions carefully and be sure to buckle your child at all times. Weight limits in Weight limits in Weight limits in...

  • Page 2: Table Of Contents

    Table of Contents Introduction page 4 Weight and dimension range page 6 Safe practices page 8 Warning page 9 Registration form and recall page 12 A car seat that grows with the child page 13 When is a child ready to ride without a booster seat page 15 Product Function •...
  • Page 3 Table of Contents • rear facing mode preparation page 43 • rear facing installation using UAS system (LUAS) page 44 • rear facing installation using vehicle belts page 45 • forward facing mode preparation page 48 • forward facing installation using UAS system page 49 •...

  • Page 4: Introduction

    Department. lt has been manufactured and assembled in a Peg Perego plant in Italy under certified quality procedures using high quality materials from certified suppliers. As with all child restraints, Primo Viaggio All In One is designed to be used by a child in a vehicle.
  • Page 5 Introduction - 5 -...

  • Page 6: Weight And Dimension Range

    Weight And Dimension Range Primo Viaggio All In One is suitable from birth up to a recomended age of 10 years. It can be used in three modes: 1_REAR FACING MODE WITH INTEGRAL BELTS: 2.3 - 20.4 kg (5 - 45 pounds) for children weighing in the range 2.3 - 18 kg (5...
  • Page 7 Weight And Dimension Range 3_BOOSTER MODE : For children weighing in the range 18-54 kg (40-120 pounds) using 3-point vehicle belt (LUAS optional). Height limit 99-160 cm (39-63 inches). FORWARD FACING - 7 -...

  • Page 8: Safe Practices

    Safe Practices • Everyone buckles up, including adults in the 1. Use LATCH strap (see pages 18, 19, back seat. Make no exceptions. If someone 2. Use the vehicle’s seat belt to buckle in unbuckles, stop the vehicle. Be firm and the empty car seat .

  • Page 9: Warning

    Warning • Do not install or use this child restraint until Service 1-800-661-5050 or send an e-mail to info.canada@pegperego.com. you read and understand all the instructions Refer to section at page 66 for additional in this manual and the labels on the product. information.
  • Page 10 DO NOT use • Keep your child in rearward facing mode as other meaning than the vehicle's lap long as possible: NEVER use Primo Viaggio All and shoulder belt system. In One in forward facing mode if baby weighs less than 10 kg (22 lbs).
  • Page 11 Warning certification program. The use of non approved covers or other accessories are not recommended and can put your child at risk in a crash. • The energy absorbing white foam (EPP and EPS) located under the fabric covers is a safety feature of this car seat and should never be removed or damaged.

  • Page 12: Registration Form And Recall

    Registration form and recall Complete and send in the registration form provided with this product right away. In case of an accident: if this car seat is involved in a car accident, it may be no longer safe for use. You may need to get a new unit. Call customer service @ 1-800-661-5050 or send an e-mail to info.canada@pegperego.com for help.

  • Page 13: A Car Seat That Grows With The Child

    1. REAR FACING from 2,3 kg (5 lbs) up to a distributed evenly on the body and the weight of 18 kg (40 lbs), Primo Viaggio All in crotch strap protects from submarining. One must be used rear facing. When riding...
  • Page 14 A Car Seat That Grows With The Child the dedicated compartment under the seat, • at least 4 years old as the protection of the child is offered by • at least 40 pounds the vehicle belt directly. LATCH connectors •...

  • Page 15: When Is A Child Ready To Ride Without A Booster Seat

    When Is A Child Ready To Ride Without A Booster Seat Children need a booster seat until their body fits properly on the vehicle seat AND the seat belt fits properly on their body without the help of a booster. Fitting properly means that you can say yes to all 5 questions below: 1.

  • Page 16: Product Function

    TURNING THE SEAT FROM FORWARD TO REAR FACING ORIENTATION Primo Viaggio All in One is delivered with the seat oriented forward facing. In order to change the orientation to rear facing, squeeze the handle (a) located in the back of the seat and pull out the rebound bar (b).

  • Page 17: Integrated Arb Spacer

    Product Function INTEGRATED ARB SPACER When the seat is adjusted in rear facing mode, the anti-rebound bar can be adjusted in two positions. Squeeze the handle (a) and pull the rebound bar out (b). Release the handle and make sure that it is locked in position (click).

  • Page 18: Latch Strap

    Product Function LATCH STRAP Latch strap is a part of the connecting system and it is stored in a compartment located under the seat and covered by a lid. To access the latch strap, remove the cushions, move the headrest up, undo the cover button and move the upholstery forward (a) as shown in the picture.
  • Page 19 Product Function Pull on the red cords (a) to free the connectors. Display the connector as shown in the picture (b) and make sure that the lid is closed. For rear facing installation, thread the connector strap into the blue guides (c) and into the openings in the shell, as shown in the picture.
  • Page 20 Product Function Picture A shows Primo Viaggio All in One ready for installation in rear facing mode with latch connectors. For forward facing installation, thread the connector strap into the red guides (a) and into the openings in the shell, as shown in the picture .

  • Page 21: Top Tether

    Product Function TOP TETHER The top tether is part of the connecting system and is stored in the back of the shell. To access the top tether open the compartment (a), take the strap out (b) and close the lid (c), as shown in the pictures.

  • Page 22: Seat Reclining

    Product Function SEAT RECLINING To change the angle of the backrest, pull the handle located under the seat in the front of the car seat (a) and recline the seat to the desired position (b) at the same time. Release the handle and check that the shell is positively locked on the base (click). Check on the side window which position you have reached (c).
  • Page 23 Product Function Picture A: shows different recline positions in rear facing. Picture B: shows different recline positions in forward facing. NOTE: when reclining the seat in forward facing it may be necessary to extract the rebound bar for a better fit into the vehicle seat. - 23 -...

  • Page 24: Headrest Adjustment

    Product Function HEADREST ADJUSTMENT Headrest can be adjusted in 12 positions, position 1 being the lowest and position 12 being the highest. To increase the headrest height, pull the handle and pull (a) the headrest at the desired position. To decrease the height of the headrest, pull the handle (b) and push (c) the headrest down at the desired position.

  • Page 25: Harness System

    Product Function HARNESS SYSTEM This car seat is equipped with an integral 5-point harness, composed of a crotch strap with buckle and shoulder /waist straps with connecting latch plates. To open the buckle push on the red button (a) and pull the latch plates apart (b) as shown in picture.
  • Page 26 Product Function To loosen the harness, push the lever located in front of the crotch strap (a) and pull the shoulder straps (b) as shown in the picture. For better accomodating the child, prepare the seat: rotate the crotch strap forward (c) and attach the tongues to the side retainers (d) as shown in the picture.

  • Page 27: Tri-Stage Cushion

    Product Function TRI-STAGE CUSHION Primo Viaggio All In One is supplied with an adaptive cushion for smaller infants. The cushion is composed of three parts designed to provide better harness fit and proper head position between the side wings of the head pad.

  • Page 28: Kinetic Pods

    Product Function KINETIC PODS Kinetic pods are moving parts designed to reduce crash forces in a side collision. To open the kinetic pod turn the knob (a) until it stops moving out (b). To close the pod, rotate in the opposite direction.

  • Page 29: Booster Mode Conversion

    Product Function BOOSTER MODE CONVERSION Make sure that the seat is oriented forward facing. To convert the car seat into a booster seat the following steps must be followed: - remove crotch and shoulder pads and all the cushions. - undo the snap buttons and open the seat upholstery as shown in the picture (a), making sure that the crotch strap buckle passes thorugh the slot in the fabric.
  • Page 30 Product Function Open the bottom compartment under the seat (b). If necessary, attach the latch connectors to their housing (c - click) making sure that the extra webbing is carefully wrapped as shown in the picture. Alternatively, latch connectors should be used to secure the child restraint to the vehicle seat, adding stability during normal driving.
  • Page 31 Product Function Close the compartment lid (f - click) and store the buckle and the chest clip, as shown in the picture. Attach the upholstery back in place. The seat is ready for use in booster mode. IMPORTANT! Upholstered components are parts of the safety features of this seat, so it is important to store them properly for future use.

  • Page 32: Cup Holder

    Product Function CUP HOLDER The cup holder can be snapped on either side of the shell, as shown in the picture. Never put hot liquids in the cup holder: risk of injuries. Do not put glass or metal or heavy or sharp objects in the cup holder : they could become dangerous in a crash.

  • Page 33: Vehicle Compatibility

    Vehicle compatibility VEHICLE CLASSES COMPATIBILITY Primo Viaggio All in One is designed to be installed in the following vehicle classes: multi-purpose passenger vehicles passenger cars Primo Viaggio All in One shall not be installed in the following vehicle classes: buses...
  • Page 34 Vehicle compatibility VEHICLE ATTACHMENT DESIGNS AND COMPATIBILITY According to crash statistics, children are safer when properly restrained in the back seat than in the front seat. Therefore, Peg Perego strongly recommends that children using this carseat ride in the back seat. This car seat can ONLY be used on a vehicle seat that faces the front of the vehicle.

  • Page 35: Uas System - What Is It And Where Is It In The Vehicle

    Uas System - What Is It And Where Is It In The Vehicle UAS stands for Universal Attachment System. It works by connecting parts of your child’s car seat to standard anchors in the vehicle. Vehicle UAS hardware: Lower anchors: these are a pair of metal bars hidden in the vehicle's seat crease.
  • Page 36 Uas System - What Is It And Where Is It In The Vehicle Tether anchors: these are metal rings or bars that are behind the vehicle seat. Common locations for top tether attachments are: the rear shelf in sedan type vehicle (a), the back of the seat backrest in minivans (b), the rear compartment in SUVs and other vehicles (c).
  • Page 37 Uas System - What Is It And Where Is It In The Vehicle Child Seat UAS hardware: Lower Connectors: these are hooks on your child’s seat that will hook onto the lower anchors in the vehicle’s seat crease. Primo Viaggio All In One is equipped with flexible connectors.

  • Page 38: Seat Belts - Which Ones Are Safe To Use With This Car Seat

    VEHICLE SEATBELTS: this child seat is designed to be installed with vehicle belts. There are many different vehicle belt designs. Unfortunately, some may be unsuitable for a safe installation of Primo Viaggio All In One. Please read carefully the pages below. Check your vehicle owner’s manual or call Peg Perego Canada Customer Service 1-800-661-5050 or send an e-mail to info.canada@pegperego.com for additional help.
  • Page 39 Seat Belts - Which Ones Are Safe To Use With This Car Seat desired length and stop the belt at that point. The retractor locks and will not let the belt lengthen at that point (only retract). To cancel ALR mode and return the retractor to the ELR mode, just let the retractor retract the webbing all the way back into the retractor.
  • Page 40 Seat Belts - Which Ones Are Safe To Use With This Car Seat Lap/shoulder belt (3-point) with Important Note: The lock off clips located Switchable Locking Retractor (ELR —> on the car seat metal frame are used to ALR) and free sliding latch plate. This type enhance the stability during normal use.
  • Page 41 Seat Belts - Which Ones Are Safe To Use With This Car Seat Lap/shoulder belt (3-point) with Lap/shoulder belt (3-point) with Emergency Locking Retractor (ELR) and Emergency Locking Retractor (ELR) with a locking latch plate. This type of belt and free sliding latch plate. This type can be adjusted by pulling/releasing the of seat belt has a latch plate that moves strap at the latch plate adjuster.
  • Page 42 Seat Belts – Which Ones Are Not To Be Used With This Car Seat WARNING: DO NOT use this carseat when there is only a lap belt (Picture A). Using just a lap belt puts your child at increased risk of injury because lap belts don’t hold the car seat properly and, when the product is used in booster mode, the child’s head and chest in a crash.

  • Page 43: Installing The Car Seat In A Vehicle

    Installing The Car Seat In A Vehicle REAR FACING MODE PREPARATION Turn the seat in rear facing mode following the procedure at page Make sure that the seat is properly levelled: 45° a child restraint used in rear facing mode should have a backrest angle between 30°...

  • Page 44: Rear Facing Installation Using Uas System (Luas)

    Installing The Car Seat In A Vehicle REAR FACING INSTALLATION USING UAS SYSTEM (LUAS) Take the latch strap out of the compartment under the seat following instruction at page 18,19, 20. Attach the connectors to the anchor (a - click) on both sides. Push on the seat (b) and at the same time pull the free end of the latch strap (c);...

  • Page 45: Rear Facing Installation Using Vehicle Belts

    Installing The Car Seat In A Vehicle REAR FACING INSTALLATION USING VEHICLE BELTS When child's weight exceeds UAS weight limits (page 6), installation with vehicle belts is required. Unsnap the upholstery in the seating area (a) and expose the blue lock off clipss for rear facing installation (b).
  • Page 46 Installing The Car Seat In A Vehicle Press the car seat with force against the vehicle seat (a). At the same time, pull the lap portion of the belt toward the buckle (b) and the shoulder portion of the belt in the opposite direction (c).
  • Page 47 Installing The Car Seat In A Vehicle IMPORTANT! ANGLE CHANGE: Check the angle of the backrest. If a change in position is necessary, change the angle to the desired position (a) following instruction at page 22, making sure that the seat clicks in one of the available position (1to 6).

  • Page 48: Forward Facing Mode Preparation

    Installing The Car Seat In A Vehicle FORWARD FACING MODE PREPARATION Turn the seat in forward facing mode following the procedure at page Take the top tether strap out of its compartment and prepare it following the procedure page Make sure that the seat is properly levelled: this seat is designed so that when installed in a common vehicle seat (15°...

  • Page 49: Forward Facing Installation Using Uas System

    Installing The Car Seat In A Vehicle FORWARD FACING INSTALLATION USING UAS SYSTEM Open the rear compartment and pull the top tether out. Unsnap the upholstery in the seating area. Take the latch strap out of the compartment under the seat and thread the latch strap into the red guides following instruction at page 18, 19, 20.
  • Page 50 Installing The Car Seat In A Vehicle Attach the top tether to the suitable anchor (a - click) in the vehicle following procedure at page 21. Pull the free end of the strap (b) until it is fully tensioned. A loose tether strap will reduce the safety of the seat in a crash.

  • Page 51: Forward Facing Installation Using Vehicle Belts

    Installing The Car Seat In A Vehicle FORWARD FACING INSTALLATION USING VEHICLE BELTS When child's weight exceeds UAS weight limits (page 6), installation with vehicle belts is required. Unsnap the upholstery in the seating area (a) and expose the red lock off clipss for forward facing installation (b).
  • Page 52 Installing The Car Seat In A Vehicle Press the car seat with force against the vehicle seat (a). At the same time, pull the lap portion of the belt toward the buckle (b) and the shoulder portion of the belt in the opposite direction (c).
  • Page 53 Installing The Car Seat In A Vehicle IMPORTANT! ANGLE CHANGE: Check the angle of the backrest. If a change in position is necessary, remove the tension in the latch strap by pressing on the adjuster button, unlatch the connector from one side, change the angle to the desired position and re-attach the connector, making sure to pull it again with maximum tension.

  • Page 54: Installing Your Child Restraint In An Aircraft

    Installing your child restraint in an aircraft This child restraint is certified for use in an aircraft. Most airlines should allow the use of a restraint which is labeled for use according to FAA regulations. However, due to the size and weight of Primo Viaggio All in One, it is recommended that airline is contacted for further information prior to booking or flight.

  • Page 55: Securing Your Child Into The Child Restraint

    Securing your child into the child restraint HARNESS USE AND ADJUSTMENT This child restraint uses a 5 point harness system to secure your child. Before placing your child in the seat, open the harness following instruction at page 25. Check if your child needs any of the filler cushions (page 27).
  • Page 56 Securing your child into the child restraint Check that the harness is at the right shoulder height. When the child restraint is used in rear facing mode, the correct shoulder position is when the shoulder straps are located at or just below shoulder level, as shown in the picture (green area).
  • Page 57 Securing your child into the child restraint When the harness is tightened, check that the chest clip is at arm pit level. If necessary remove the shoulder pads. IMPORTANT! SNUG STRAP: A snug strap should not allow any slack. It lies in a relatively straight line without sagging.

  • Page 58: Use And Adjustment In Booster Mode

    MODE When the child structure and stature allow, and at a minimum weight of 18 kg (40 lbs), Primo Viaggio All in One can be used as a booster seat. Refer to page 29, 30, 31 convert your child restraint in a booster seat.

  • Page 59: Securing The Child In The Booster Seat

    Securing the child in the booster seat Make sure that your child is sitting comfortably, with the back fully against the backrest of the booster seat. Pull the vehicle belt and make sure that the lap portion of it passes into the low guides (a).
  • Page 60 Securing the child in the booster seat Buckle the belt (c - click). Pull on lap belt first (d) toward the buckle and then on the shoulder belt (e) making sure that they are not tangled anywhere. Picture shows the correct belt pattern around the child's neck and shoulder.

  • Page 61: Cleaning And Maintenance

    Cleaning and maintenance Your child restraint requires a minimum of cleaning and maintenance. Do not clean with harsh products or solvents. Keep moving parts clean. In case, clean plastic parts with a damp cloth. Do not use water with harness and latching mechanisms. Protect your child restraint from extreme cold, water, rain and sun exposure.
  • Page 62 Cleaning and maintenance Primo Viaggio All in One is designed to be easy to clean and maintain thanks to the Dream Trim system. The central part of the cover (highlighted in the picture), likely to become dirt more frequently than the rest of the product can be detatched in a second and washed separately.
  • Page 63 Cleaning and maintenance To remove the headrest panel, open and remove the shoulder parts (a). Undo the snap buttons located below the headrest (b) and pull the head panel from the side wings (c) and all the way up (d). IMPORTANT! SOFT PARTS: when removing the headrest panel take care of the soft white EPP insert.
  • Page 64 Cleaning and maintenance To remove the seat panel, undo the crotch pad velcro strap (a) and open the zip (b) located below the panel. Open the snap buttons (c) located on the side of the panel and pull it (d) all the way up. For cleaning instruction refer to page - 64 -...
  • Page 65 Cleaning and maintenance If the entire seat cover must be removed for cleaning, undo the lower part of upholstery from the bottom edge (a). Pull the elastic band through the groove (b) on the side of the shell untill it is free. Keep pulling the soft cover upward (c).

  • Page 66: How To Tell If The Seat Has Been In A Crash

    How to tell if the seat has been in a crash Primo Viaggio All in One can withstand minor crashes without any damage. If the child restraint has been in a crash, you must determine if it is suitable for further use.

  • Page 67: Replacement Parts

    Replacement Parts 1) BSAIONCA* 2) BCUIONCA* 3) BPTIONNA* 4) BRIIONNA* 5) BSPIONNA* 6) MUCI0177N NOTE: Spare parts available in different 7) BSGIONNA* colors* to be specified when ordering. 8) SAPI6468NGZ - 67 -...

  • Page 68: Declaration Of Conformity

    FR_Français EN_English Declaration of conformity Déclaration de conformité Dénomination du produit Product name PRIMO VIAGGIO ALL IN ONE PRIMO VIAGGIO ALL IN ONE Product reference number Identi cation du produit IMAL* IMAL* Standard de référence (origine) Reference Standards (origin) CMVSS 571-213-213.1 - 213.2 CMVSS 571-213-213.1 - 213.2...

Table of Contents