Page 3
Billion BiPAC 7401V(G)P R4 VoIP/ (802.11g) ADSL2+ Firewall Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM.
Quick Start Guide The Front LEDs Lit green when one of Lit orange when LAN ports is connected to power is ON. Lit red an Ethernet device. Lit green when the means system is fail. Blink when data is being Lit Green when the device is SIP Registration is Lit green when the...
Page 5
Billion BiPAC 7401V(G)P R4 VoIP/ (802.11g) ADSL2+ Firewall Router 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to different countries.
Page 6
Quick Start Guide 3. Phone Connection Connect RJ-11 cable to the router’s phone port and the analog phone set. 4. Line Connection a) Connect RJ-11 cable to the router Line port and the splitter phone port. b) Connect RJ-11 cable to the router DSL port and the splitter ADSL port. c) Connect RJ-11 cable to the splitter Line port and the phone jack on the wall.
Page 7
Billion BiPAC 7401V(G)P R4 VoIP/ (802.11g) ADSL2+ Firewall Router 6. Splitter/ Micro-filter Connection The Splitter / Micro-filter are important for ADSL installation, they help direct high-frequency signals to the ADSL modem & low frequency signals to the telephone or other analogue device to prevent inter-modulation distortion & get good speed/stable ADSL sync rate.
Page 8
Most problems can be solved by referring to the Troubleshooting section in the User Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product. WORLDWIDE http://www.billion.com BiPAC 7401V(G)P R4: V1.01EN...
Need help?
Do you have a question about the BiPAC 7401V(G)P R4 and is the answer not in the manual?
Questions and answers