Device Description - Billion BiPAC 7401VGP R3 User Manual

Device Description

The Front LEDs
Port
1 Power
2 Ethernet Port
3 Wireless
Phone (RJ-11
4
connector)
Line(Router
5 with LINE
port only)
VoIP(RJ-11
6
connector)
7 DSL
8 Internet
Both red and green LEDs lit together when power is ON.
Lit red means system failure. Restart the device or contact support.
Lit green when the device is ready.
Lit when one of LAN ports is connected to an Ethernet device.
Lit green when the speed of transmission hits 100Mbps;
Lit orange when the speed of transmission hits 10Mbps.
Blink when data is being Transmitted / Received.
Lit green when the wireless connection is established.
Flash when sending/receiving data.
Flash once per second while wi-fi protected setup is in progress.
Lit green when phone is off hook.
Lit green when the inbound and outbound calls are transmitted through
PSTN.
Lit when the SIP Registration is OK.
Green for Phone.
Lit Green when the device is successfully connected to an ADSL
DSLAM. ("line sync").
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection is
absent.
Meaning