Billion BiPAC 7401VGP R3 User Manual page 151

SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2
security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm
for "security", but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote
monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II)System group
System group
Interface group
Address Translation group
IP group
ICMP Group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group
From RFC 1650 (EtherLike-MIB)
dot3stats
From RFC 1493 (Bridge MIB)
dot1 dBase group
dot1 dTp group
dot1 dStp group (if configured as span-
ning tree)
From RFC 1472 (PPP/Security MIB)
PPP security group
From RFC 1473 (PPP/IP MIB)
PPP IP group
From RFC 1474 (PPP/Bridge MIB)
PPP Bridge group
From RFC 1573 (IfMIB)
ifMIBObjects group
From RFC 1695 (atmMIB)
atmMIBObjects
From RFC 1907 (SNMPv2)
only snmpSetSerialNo OID
From RFC 1471 (PPP/LCP MIB)
pppLink group
pppLgr group (not applicable)
144