Billion BiPAC 7401VGP R3 User Manual page 83

IPv6: check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in IPv4
mode.
IPv6 Address: type the IPv6 address from your ISP, or get it automatically. " ::" means to obtain
IPv6 address automatically.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the concrete
one in the Primary field.
4. Pure Bridge: Select this item if just want to connect your ISP by other device or PC.
Acceptable Frame Type: Select accept all or accept tagged only. Accept all is default value.
Filter Type: Allow All, IP or PPPoE packets to go through the device.
76