Lan - Local Area Network; Bridge Interface - Billion BiPAC 7401VGP R3 User Manual

LAN - Local Area Network

Here are the items within the LAN section:
Autoconfig, Ethernet Client Filter, Wireless, Wireless Security, Wireless Client Filter, WPS,
Port Setting and DHCP Server.

Bridge Interface

You can setup member ports for each VLAN group under Bridge Interface section.
Ethernet: P1 & P2 (Port 1, 2)
Ethernet1: P3, P4 & Wireless (Port 3, 4 & wireless). Uncheck P3, P4 & Wireless from Ethernet
VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in
this order.
Bridge Interface
ethernet
ethernet1
ethernet2
ethernet3
Wireless
Management Interface: To specify which VLAN group is possible to perform device management,
like doing web management.
Note: NAT/NAPT can be applied to management interface only.
Bridge Interface, Ethernet, IP Alias, IPv6
VLAN Port (Always starts with)
P1 / P2 / P3 / P4 / Wireless
P2 / P3 / P4 / Wireless
P3 / P4 / Wireless
P4 / Wireless
Wireless
35