Billion BiPAC 7401VGP R3 User Manual page 36

4. The list below has different mode applied for your choice. Choose 0/33/PPPoE (Recommended)
and click Apply.
5. Please enter "Username" and "Password" as supplied by your ISP (Internet Service Provider)
and click Apply to continue.
Profile Port: Select the connection mode. There is ADSL.
Protocol: Select the protocol mode. The default mode is PPPoE.
VPI/VCI: Enter the VPI and VCI information provided by your ISP.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Service Name: This item is for identification purposes. If it is required, your ISP provides you the
information.
Authentication Protocol: Default is Auto. Your ISP advises on using Chap or Pap.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an IP address
from your ISP.
Obtain DNS automatically: Click to activate DNS and to enable the system to automatically
detect DNS.
29