Billion BiPAC 7401VGP R3 User Manual page 80

IPv6: check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in
IPv4 mode.
Gateway: type the gateway address to which WAN packets are forwarded.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the
concrete ones in the Primary and Secondary field.
2. Fixed IP Address: Select this item if your ISP provides you with a static IP address.
IP(0.0.0.0: Auto): Type the IP address that your ISP provided.
Netmask: Type the subnet mask that your ISP provided. Gateway: Type the gateway address
that your ISP provided.
Gateway: You must specify a gateway IP address (supplied by your ISP).
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single IP account, sharing the single IP address. If PCs in LAN should share
the WAN IP for WAN access, please enable NAT. If users on your LAN have public IP
addresses and can access the Internet directly, the NAT function can be disabled.
MAC Spoofing: Select Enable and enter a MAC address that will temporarily change your
router's MAC address to the one you have specified in this field. Leave it as Disabled if you do
not wish to change the MAC address of your router.
Obtain DNS: Check the Automatic to enable the router to configure this value, or type in the
Primary and Secondary DNS values provided by your ISP.
73