Billion BiPAC 7401VGP R3 User Manual page 10

The Rear Ports
Port
1 Antenna
2 DSL
3 Line
4 Phone
5 Ethernet
6 WPS
7 RESET
8 Power
9 Power Switch
Meaning
Connect the detachable antenna to this port.
Connect this port to the ADSL/telephone network with the
RJ-11 cable (telephone) provided.
Connect this port to the telephone jack on the wall with RJ-11cable.
Connect this port to an analog phone set with RJ-11 cable.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN
ports when connecting to a PC or an office/home network of 10Mbps
or 100Mbps.
Caution: Port 4 can be either a LAN or Console port at a time
but not both.
Push WPS button for less than 5 sec to trigger Wi-Fi Protected Setup
function; push WPS button for more than 5 sec to enable/disable
WLAN Service.
To be sure the device is being turned on press RESET button for:
1-3 seconds: quick reset the device.
6 seconds and above, power off, power on the device: restore to
factory default settings. (Cannot login to the router or forgot your
Username/Password. Press the button for more than 6 seconds).
Caution: After pressing the RESET button for more than
6 seconds, to be sure you power cycle the device again.
Connect it with the supplied power adapter.
Power ON/OFF switch.
3