Download  Print this page

Programming Mode - Fetco CBS-2021 e Series Programming Manual

Hide thumbs
   

Advertisement

Programming Mode

To enter Programming mode, turn the main power switch OFF.
(The main power switch is on the back of the unit.)
Press and hold the STOP button while turning the main power
switch ON.
Release the STOP button when the software version is displayed.
The STOP button is used to advance from one setting to the next.
It is illuminated green when in Programming mode.
The BREW buttons are used to change each setting up or down.
To exit Programming, press and hold the HOT WATER button for
approximately 2 seconds.
The ON/OFF switch may be used to exit programming without saving
new settings.
Example: VER 32.A

Advertisement

Table of Contents

This manual is also suitable for:

Cbs-2021e series

Comments to this Manuals

Symbols: 0
Latest comments: