Panel Menu Operation; Quick Menu Operation - Yaesu FT-920 Operating Manual

stored in a special Menu Bank which allows you to
recall them quickly by pressing and holding in the
[S ] key while pressing another key. These Menu
TEP
Items are shown below:
For example, here is how to use the Panel Menu fea-
Me nu # Func tion D e scri pt ion
Display Dimmer On/Off
U-0 8
Mul ti Panel Display Choice
U-0 9
Enhanced Tuning Scale
U-1 0
Display
"V OX" Hang Time i n CW
U-2 4
(TX) CTCSS Tone
U-3 7
Frequency
ture to activate the Display Dimmer:
 Press and hold in the [S
‚ While you are holding in the [S
[D ] key. Menu U-08 will appear just to the
ISPLAY
left of the "DIMMER" title, and "oFF" will blink in
the main display area. This means that the cur-
rent condition of the Dimmer is Off .
ƒ Rotate the VFO-B Tuning Dial to select "on;" you
will note that the display just got darker.
„ Press the [ENT] key on the keypad. You may now
rotate the VFO-B Tuning Dial if you want to change
some other Menu Item, or just press [M
exit the Menu System and resume normal opera-
tion.

Quick Menu Operation

The Quick Menu feature allows you to select certain
Menu Items you feel the need to change more fre-
quently. These are assembled into Quick Menu bank
which operates almost identically to the "Normal"
Menu mode. However, access is very slightly differ-
ent:
r When you have created a Quick Menu, you
activate it by pressing [M
described above in the "Normal Menu Opera-
tion" section). You now only have access to
the Quick menu Items.
r To gain access to the other "Normal" Menu
Items, press [M
ond (instead of pressing it momentarily).
After you have done one of the above actions with
70
P re ss this ke y whi le
Holdi ng in [ S
TE P
[ ] K ey
D
ISP LA Y
[ ] key
A B
[ M S
E TER E LEC T
[ ] K ey
B -I
K N
Mode
[ ] K ey
R
P T
] key.
TEP
] key, press the
TEP
] momentarily (as
ENU
] and hold it in for ½ sec-
ENU
the [M ] key, operation is identical to that described
ENU
in the "Normal Menu Operation" section.
The Quick Menu bank is set up by first accessing
Menu Item U-67 via Normal Menu operation. For il-
lustrative purposes, we shall create a Quick Menu
bank consisting of Menu Items U-01, U-02, and U-
03:
] ke y
 Press the [M
Menu mode.
‚ Rotate the VFO-B Tuning Dial to select Menu Item
] K ey
U-67. The Title for this item is "Q MENU," and
the default value is "U-01 oFF."
ƒ Press the [E
mand mode. The "U-01 oFF" display will blink.
„ Now press the [U
"on" relative to U-01.
… Rotate the VFO-B Tuning Dial to select Menu Item
U-02 . Again press [U
"on."
† Rotate the VFO-B Tuning Dial to select Menu Item
U-03. Again press [U
‡ Press the [E
U-67, then press [M
ˆ Now press [M
VFO-B Tuning Dial. You will see that you have
access only to Menu Items U-01, U-02, and U-03.
] to
ENU
Press [M
ENU
‰ Press and hold in the [M
then rotate the VFO-B Tuning Dial. You will see
that you now have access to all Menu Items. Press
[M ] to exit.
ENU
We will now provide a summary chart showing the
Menu Items available, followed by a more compre-
hensive description of each Menu Item and the
choices available.
Menu Mode Summary Chart
] key momentarily to enter the
ENU
] key to enter the Menu Item Com-
NT
] key to change the "oFF" to
P
] to change the "oFF" to
P
] to change "oFF" to "on."
P
] key to lock in the new settings for
NT
] to exit.
ENU
] momentarily, and rotate the
ENU
] to exit.
] key for ½ second,
ENU
FT-920 Operating Manual