Yaesu FT-900 Technical Manual
Hide thumbs
Also See for FT-900:
- Operating manual (53 pages) ,
- Operating manual (73 pages) ,
- Operating manual (75 pages)
Need help?
Do you have a question about the FT-900 and is the answer not in the manual?
Questions and answers
TP3001 & TP3002
TP3001 and TP3002 in the Yaesu FT-900 are test points used to enable a modification mode. Connecting a jumper between them allows the user to enter a special setup by holding specific buttons during power-on to change settings stored in EEPROM.
This answer is automatically generated
ON THE CONTROL UNIT WHERE ARE TP3001 AND TP3002
TP3001 and TP3002 are located near the top edge of the CNTL (control) unit board, in the center from left to right.
This answer is automatically generated