Specifications - Yaesu FT-920 Operating Manual

Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity:
IF Selectivity (-6/-60 dB):
Squelch Sensitivity (IPO Off):
IF Rejection:
Image Rejection:
IF Shift Range:
DSP Notch Depth:
Audio Output:
Audio Output Impedance (SPKR):
Automatic Antenna Tuner
Impedance Range:
Frequency Range:
Matching Time:
Matched SWR:
Specifications are subject to change, in the interest of technical improvement, without notice or obligation. Specifications
are guaranteed only within Amateur bands.
FT-920 Operating Manual
Double-conversion Superheterodyne (FM: Triple-conversion)
68.985 MHz
8.215 MHz
455 kHz (FM)
Frequency SSB/CW/Dig.(2.4 kHz)
150 ~ 250 kHz 5 µV
250 ~ 500 kHz 4 µV
0.5 ~ 1.8 MHz 2 µV
1.8 ~ 24.5 MHz 0.20 µV
24.5 ~ 54 MHz 0.13 µV
(With Preamp On, for 10 dB S+N/N or 12 dB FM SINAD)
SSB, CW, FSK, AFSK 2.4 kHz/5.0 kHz
CW 500 Hz/1.8 kHz (w/optional YF-116C CW Filter)
AM 6 kHz/14 kHz (w/optional YF-116A AM Filter)
FM 12 kHz/25 kHz (w/optional FM-1 FM Unit)
SSB/CW/Digital/AM: <2.0 µV
FM (28-56 MHz): <0.32 µV
>70 dB (HF)
>50 dB (VHF)
>70 dB (1.8 ~ 56 MHz)
±1.2 kHz
>35 dB
1.5 W into 4 with <10% THD (Speaker)
100 mV @ 600 (Digital, fixed level)
4 ~ 8
16.7 ~ 150 (1.8 ~ 30 MHz)
25.0 ~ 100 (50 ~ 54 MHz)
160 m ~ 6 m amateur bands
<30 seconds
<1.4:1
AM (6 kHz) FM (28 MHz +)
40 µV —
32 µV —
16 µV —
2 µV 0.5 µV
1.3 µV 0.25 µV
3