Adjusting Source Levels; Enhancing Bass (Bass Booster); Options On The "Av System Settings" Menu; Displaying The "Av System Settings" Menu - Pioneer AVIC-F710BT Operation Manual

Chapter
21 Customising preferences

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
Touch [SLA] on the "AV Sound Settings"
2
menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 122.
3 Touch [+] or [–] to adjust the source vo-
lume.
+4 to -4 is displayed as the source volume is
increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! CD, ROM, DivX (for AVIC-F910BT and AVIC-
F9110BT)
! CD, ROM (for AVIC-F710BT)
! AV1 and AV2
p The different source volume level can be set
between iPod and USB.
p For AVIC-F910BT and AVIC-F9110BT, the
source volume level can be set to DVD-V
and DVD-VR respectively as well as differ-
ently from the other sources of the built-in
DVD drive previously mentioned.

Enhancing bass (Bass Booster)

The "Bass Booster" enhances bass sounds,
which can be muted by driving noise.
Touch [Bass Booster] on the "AV Sound
1
Settings" menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 122.
2 Touch [+] or [-] to adjust the range from
0 to 6.
126
Engb
Options on the "AV System
Settings" menu
Displaying the "AV System
Settings" menu
1 Press the MENU button to display the
"Top Menu", and then touch [Settings].
2 Touch [AV Settings].
The "AV System Settings" menu appears.
p You can only adjust [Wide Mode] when se-
lecting an AV source with video.
p You can only adjust the following items
when the AV source is "OFF";
[MUTE Input/GUIDE], [Rear SP], [Auto PI]
and [FM Step]

Setting video input 1 (AV1)

You can switch this setting according to the
connected component.
p This setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.