Notes On Internal Memory; Before Removing The Vehicle Battery; Data Subject To Erasure; Resetting The Microprocessor - Pioneer AVIC-F710BT Operation Manual

Chapter
01 Introduction

Notes on internal memory

Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
= For more detailed information about the
items which would be erased, refer to
Returning the navigation system to the
default or factory settings on page 131.

Data subject to erasure

The information is erased by pressing the
RESET button or disconnecting the yellow lead
from the battery (or removing the battery it-
self). However, some items remain.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
= For more detailed information about the
items which would be erased, refer to
Returning the navigation system to the
default or factory settings on page 131.

Resetting the microprocessor

CAUTION
Pressing the RESET button clears the settings for
the AV source without clearing all the navigation
function items. Please refer to the related section
before clearing.
= For more detailed information about the items
which would be erased, refer to Returning the
navigation system to the default or factory set-
tings on page 131.
The microprocessor must be reset under the
following conditions:
! Prior to using this product for the first time
after installation.
! If the product fails to operate properly.
10
Engb
! If there appear to be problems with the op-
eration of the system.
! When changing the combination of equip-
ment.
! When adding/removing additional pro-
ducts that connect to the navigation sys-
tem.
! If your vehicle position is shown on the
map with a significant positioning error.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen tip
or other pointed implement.
RESET button