Setting The Illumination Colour - Pioneer AVIC-F710BT Operation Manual

Customising preferences
2 Touch [+] or [–] to adjust the brightness.
Each time you touch [+] or [–] increases or de-
creases the level. 10 to 00 is displayed as the
level is increased or decreased.
3 Touch to return to the previous
screen.
p You can also start adjustment by pressing
and holding the MAP button.

Setting the illumination colour

The illumination colour can be selected from
11 different colours. Furthermore, the illumina-
tion colour can switched between these 11 col-
ours in order.
Selecting the colour from the preset
colours
Touch [Illumi Color] on the "System Set-
1
tings" menu.
= For details, refer to Displaying the "System
Settings" menu on page 118.
2 Touch the colour you want.
Available options;
! Coloured keys — Selects the desired preset
colour
! Memory 1/Memory 2/Memory 3 — Col-
ours registered in the memory
= For details, refer to Creating a user-de-
fined colour and storing it to memory on
this page.
! Scan — Shifts between the eight default
colours in sequence gradually.
Current colour balance
Creating a user-defined colour and
storing it to memory
You can create a user-defined colour and set it
as the illumination colour.
Touch [Illumi Color] on the "System Set-
1
tings" menu.
= For details, refer to Displaying the "System
Settings" menu on page 118.
2 Touch [Custom].
p If [Scan] is set, [Custom] cannot be se-
lected.
3 Touch [+] or [–] to adjust the values for
Red, Green and Blue to create a favourite
colour.
Watch the illumination of hardware keys while
adjusting the colour.
Each time you touch [+] or [–] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be stored with all of the va-
lues set to "+00".
4 Touch [Memory 1], [Memory 2] or
[Memory 3] to store the illumination col-
our.
5 Touch to return to the previous
screen.
Chapter
21
121
Engb