Inserting An Sd Memory Card; Ejecting An Sd Memory Card; Plugging And Unplugging A Usb Storage Device; Plugging In A Usb Storage Device - Pioneer AVIC-F710BT Operation Manual

Basic operation

Inserting an SD memory card

% Insert an SD memory card into the SD
card slot.
Insert it with the contact surface facing to the
left and press the card until it clicks and com-
pletely locks.
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is
not guaranteed.
p This unit may not achieve optimum perfor-
mance with some SD memory cards.
p Do not insert anything other than SD mem-
ory cards or dummy SD cards into the SD
card slot.

Ejecting an SD memory card

1 Press the SD memory card until it clicks.
The SD memory card is ejected.
2 Pull out the SD memory card.
p Insert the dummy SD card to keep the SD
card slot free of dust when the SD memory
card is not inserted.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
! Never remove the USB storage device immedi-
ately after plugging it. It may cause that the
navigation system cannot recognise the exter-
nal storage device (USB, SD).

Plugging in a USB storage device

% Plug a USB storage device into the USB
connector.
USB connector
p Compatibility with all USB storage device is
not guaranteed.
This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p Connection via USB hub is not possible.

Unplugging a USB storage device

% Pull out the USB storage device after
checking that no data is being accessed.
Chapter
02
USB storage device
13
Engb