Changing The Splash Screen; Setting The Rear View Camera - Pioneer AVIC-F710BT Operation Manual

Customising preferences
3 Touch the desired language.
After the language is selected, the screen re-
turns to the previous screen.
p [TTS Setup] is not used normally. This key
will be used in the future when the system
needs a replacement of current TTS files.
Touch the key next to "Program lan-
4
guage:".
5 Touch the desired language.
If you change [Program language:], a mes-
sage prompting you to reboot appears. Touch
[OK] to reboot the system.

Changing the splash screen

You can change the splash screen that ap-
pears when the navigation system starts. Copy
your chosen image to the external storage de-
vice (USB, SD), and select the image to im-
port.
p Splash screen images should be used with-
in the following formats;
— BMP or JPEG files
— Allowable horizontal and vertical size
are 2 592 pixels x 1 944 pixels or smaller
— Allowable data size is 15 MB or smaller
p Proper compatibility with allowable files is
not guaranteed.
p Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the external storage device
(USB, SD) again and re-import the original
image.
Create a folder named "Pictures" on the
1
top-most directory of the external storage
device (USB, SD) and store the picture files
in this folder.
2 Insert the SD memory card into the SD
card slot or plug the USB storage device
into the USB connector.
Touch [Splash Screen] on the "System
3
Settings" menu.
= For details, refer to Displaying the "System
Settings" menu on the previous page.
The navigation system checks the external sto-
rage device (USB, SD). If an appropriate file is
found, the file list will be displayed.
p If there is no "Pictures" folder or loadable
file, a message appears.
p You can switch the list by touching [Import
from SD] and [Import from USB].
4 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
5 Touch [OK].
The image is set as the splash screen, and the
system returns to the "System Settings"
menu.

Setting the rear view camera

The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC2). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen rear
view camera image installed on your vehicle.
When the gear stick is in the REVERSE (R) po-
sition, the screen automatically switches to
full-screen rear view camera.
Camera for "RearView"
[RearView] can display the full-screen rear
view camera image any time without relation
to the gear stick position after touching [Rear-
View] on the "AV Source" menu. [RearView]
is useful if you want to monitor an attached
trailer, etc.
Chapter
21
119
Engb