Pioneer AVIC-F710BT Operation Manual page 137

Appendix
The icon 9 is displayed, and op-
eration is not possible.
The picture stops (pauses) and
the navigation system cannot be
operated.
The picture is stretched, with in-
correct aspect ratio.
A parental lock message is dis-
played and DVD playback is not
possible.
Parental lock for DVD playback
cannot be cancelled.
Playback is not with the audio
language and subtitle language
settings selected in [DVD
Setup].
The picture is extremely unclear/
distorted and dark during play-
back.
Cannot be operated.
Problems with the phone screen
Symptom
Dialling is not possible because
the touch panel keys for dialling
are inactive.
The operation is not compatible
with the video configuration.
The reading of data is impossible
during disc playback.
The aspect setting is incorrect for
the display.
Parental lock is on.
The code number is incorrect.
The DVD playing does not feature
dialogue or subtitles in the lan-
guage selected in [DVD Setup].
The disc features a signal to prohibit
copying. (Some discs may have
this.)
The iPod is frozen.
An error has occurred.
Cause
Your phone is out of range for ser-
vice.
The connection between the mobile
phone and the navigation system
cannot be established now.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
After touching g once, start playback once
more.
Select the appropriate setting for that image.
(Page 127, Page 79)
Turn parental lock off or change the level.
(Page 79)
Input the correct code number. (Page 79)
Switching to a selected language is not possi-
ble if the language selected in [DVD Setup]
is not recorded on the disc.
Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
"Acc off". Then start the engine again, and
turn the power to the navigation system back
on. If this does not solve the problem, press
the RESET button on the navigation system.
! Update the iPod software version.
Action (Reference)
Retry after re-entering the range for service.
Perform the connection process.
Appendix
137
Engb