Using Non Fading Output; Using The High Pass Filter; Adjusting Source Levels; Compensating For Equaliser Curves (Eq-Ex) - Pioneer AVIC-X1BT Operation Manual

Using non fading output

When the non fading output setting is on, the
audio signal does not pass through navigation
system's low pass filter (for the subwoofer), but is
output through the RCA output.
1
Touch "NON FADING" in the AUDIO
menu.
Only when PREOUT (the subwoofer control-
ler setting in INITIAL menu) is FULL, you
can select "NON FADING".
➲ Setting the rear output and subwoofer con-
troller ➞ Page 107
2
Touch "ON" to turn non fading output on.
To turn non fading output off, touch "OFF".
3
Touch "+" or "–" to adjust the output
level of the non fading.
+6 to –6 is displayed as the level is increased
or decreased.

Using the high pass filter

When you do not want low sounds from the sub-
woofer output frequency range to play from the
front or rear speakers, turn the HPF (high pass
filter) on. Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1
Touch "HPF" in the AUDIO menu.
2
Touch "ON" to turn high pass filter on.
To turn high pass filter off, touch "OFF".
3
Touch  or  to select cut-off frequency.
Each time you touch  or  selects cut-off fre-
quencies in the following order:
50 — 80 — 125 (Hz)
When PREOUT (the subwoofer controller
setting in INITIAL menu) is SUB W, the
HPF function is effective for front speakers
only.
104

Adjusting source levels

SLA (source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between
sources.
• Settings are based on the FM tuner volume
level, which remains unchanged.
1
Compare the FM tuner volume level with
the level of the source you wish to adjust.
2
Touch "SLA" in the AUDIO menu.
3
Touch "+" or "–" to adjust the source vol-
ume.
+4 to –4 is displayed as the source volume is
increased or decreased.
Sources are set to same source level adjust-
ment volume automatically.
• FM tuner (RADIO) and MW/LW tuner
(RADIO)
• CD and MP3
• DVD (built-in DVD drive) and S-DVD
(optional DVD player)
• EXT-1 and EXT-2
• AUX and AV
Compensating for equaliser
curves (EQ-EX)
The EQ-EX function smoothes the effects of each
equaliser curve. Furthermore, you can adjust
bass and treble for each source when CUSTOM
curve is selected.
1
Touch "EQ-EX" in the AUDIO menu.
Touching "EQ-EX" switches between "ON" and
"OFF".