Chapter
08
Using hands-free phoning
Setting automatic connection
When automatic connection is active, the na-
vigation system will automatically establish a
connection with a registered phone when it
comes into range. Using this feature avoids all
of the processes for establishing a connec-
tion.
p With some mobile phones, it may not be
possible to perform automatic connection.
Touch [Phone Settings] on the "Phone
1
Menu".
= For details, refer to Displaying the Phone
Menu on page 48.
2
Touch [Auto Connect].
Touching [Auto Connect] switches between
[On] and [Off].
p Automatic connection is performed in the
registration number order.
p Some mobile phones do not support auto-
matic connection.
Editing the device name
You can change the device name to be dis-
played on your mobile phone. (Default is
[Pioneer Navi].)
Touch [Phone Settings] on the "Phone
1
Menu".
= For details, refer to Displaying the Phone
Menu on page 48.
2
Touch [Edit Name].
The keyboard to enter the name appears.
58
Engb
3
Touch
to delete the current name,
and enter the new name by using the key-
board.
4
Touch [Done].
The name is changed.
p Up to 30 characters can be entered for a de-
vice name.
Notes for hands-free phoning
General notes
! Connection to all mobile phones featuring
Bluetooth wireless technology is not guar-
anteed.
! The line-of-sight distance between this na-
vigation system and your mobile phone
must be 10 metres or less when sending
and receiving voice and data via Bluetooth
technology. However, the actual transmis-
sion distance may be shorter than the esti-
mated distance, depending on the usage
environment.
! With some mobile phones, the speakers of
the system may not produce a ring sound.
! If private mode is selected on the mobile
phone, hands-free phoning may be dis-
abled.
! The mobile phone used must be compati-
ble with the profile of this navigation sys-
tem.
! When using Bluetooth wireless technology,
this navigation system may not be able to
operate all of the functions on the mobile
phone.