Using AV input
You can display "video image" output by AV1
Input or AV2 Input to the screen of the navi-
gation system. For details of the connection
method, refer to "Installation Manual".
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the handbrake.
Using AV1
You can display "video image" output by the
equipment connected to "AV1 Input".
Touch [AV1 Input] on the "AV System
1
Settings" menu.
= For details, refer to Setting video input 1
(AV1) on page 126.
Touch [AV1] on the "AV Source" menu.
2
The image is displayed on the screen.
= For details concerning operations, refer to
Screen switching overview on page 16.
Using AV2
You can display "video image" output by the
equipment connected to "AV2 Input".
Touch [AV2 Input] on the "AV System
1
Settings" menu.
= For details, refer to Setting video input 2
(AV2) on page 127.
Touch [AV2] on the "AV Source" menu.
2
The image is displayed on the screen.
= For details concerning operations, refer to
Screen switching overview on page 16.
Using the touch panel keys
% Touch the screen to display the touch
panel keys.
1 Recall equaliser curves
= For details, refer to Recalling equaliser
curves on page 123.
2 Hide the touch panel keys
Touching [Hide] hides the touch panel
keys. Touch anywhere on the LCD screen to
display the touch panel keys again.
3 Display the map screen
Chapter
20
1
2
3
105
Engb