Table of Contents
Advertisement
2.3.3 Fan
Plug in the fan cable to the fan connectors onboard. The fan connectors are
marked CPUFAN1 , CPUFAN2 and FAN on the system board. You can plug
the CPU fan cable to both the 2-pin fan connector CPUFAN1 and the 3-pin fan
connector CPUFAN2. FAN can be reserved for the housing fan. Note that only
CPUFAN2 and FAN support the fan monitoring function, because 3-pin fan
has an extra pin called SENSE, which periotically sends fan signal out.
2.3.4 PS/2 Mouse
The onboard PS/2 mouse connector is a 6-pin Mini-Din connector marked PS2
MS . The view angle of drawing shown here is from back panel of the housing.
Hardware Installation
CPUFAN2 & FAN
CPUFAN1
PS/2 Mouse
SENSE
+12V
GND
GND
+12V
PCB
2-15
Hide quick links:
Advertisement
Table of Contents
