AOpen AX59PRO User Manual page 76

AWARD BIOS
Integrated Peripherals
USB Controller
Enabled
Disabled
Integrated Peripherals
USB Legacy Support
Enabled
Disabled
Integrated Peripherals
Onboard FDC
Controller
Enabled
Disabled
Integrated Peripherals
Integrated Peripherals
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
3-26
USB Controller
This item is used to enable or disable USB controller.
USB Legacy Support
This item lets you enable or disable the USB
keyboard driver within the onboard BIOS. The
keyboard driver simulates legacy keyboard command
and let you use USB keyboard during POST or after
boot if you don't have USB driver in the operating
system.
Caution: You can not use both USB driver
and USB legacy keyboard at the same time.
Disable "USB Legacy Support" if you have
USB driver in the operating system.
Onboard FDC Controller
Setting this parameter to Enabled allows you to
connect your floppy disk drives to the onboard floppy
disk connector instead of a separate controller card.
Change the setting to Disabled if you want to use a
separate controller card.
Onboard Serial Port 1
Onboard Serial Port 2
This item allow you to assign address and interrupt
for the board serial port. Default is Auto.