Advertisement
Quick Links
Pneumatic Pressure Switch
Series
Can be used for micro load,
around 10 mA e.g. relays, pro-
grammable controllers, etc.
Easy electrical wiring
Wide space for wiring. Fixed wiring possible with
1
G
/
connector.
2
Wide calibration range
0.1 to 0.7 MPa
High frequency operation and
long service life due to
piston construction
High Frequency: 1 cycle/sec
Long service life: 10 million cycles
With indicator light (Option)
IS3100
IS3000-02
(Gasket piping)
(Rc
1
/
4
IS3110
IS3010-02
(Gasket piping)
(Rc
1
/
4
JIS Symbol
IS3000
Model
Model
IS3000-02
IS3100
IS3010-02
IS3110
Specifications
Fluid
Proof pressure
Max. operating pressure
Pressure adjustment range
Ambient and fluid temperature
Contacts
Error of scale
Hysteresis
Repeatability
Weight
Micro Switch Ratings
Model
Load
Circuit
Rated
thread)
voltage (V)
125 AC
250 AC
30 DC
125 DC
Insulation resistance: 100 MΩ or more at 500 VDC by megameter
Voltage resistance: 1500 VAC,
thread)
IS3
Piping method
0
Rc
1
/
4
1
Gasket piping
Micro switch load type
0
1
Piping method
Micro switch type
Rc
/
thread
1
4
Gasket piping
Rc
/
thread
1
4
Gasket piping
IS3 00
Non inductive (A)
Load resistance
Light load
N.C.
N.O.
N.C.
N.O.
5
1.5
0.7
3
1
0.5
4
2
0.4
0.05
50
/
Hz for 1 min. (When using switch with neon light: 1000 VAC for 1 min.)
60
How to Order
0
0
0
thread
Standard
Micro load
For details about certified products
conforming to international standards,
visit us at www.smcworld.com.
Min. applicable load
Standard
5 VDC 160 mA
Micro load
5 VDC 1 mA
Air/Inert gas
1.0 MPa
0.8 MPa
0.1 to 0.7 MPa
–5 to 60°C (No freezing)
1ab
±0.1 MPa
0.05 MPa or less
±0.05 MPa
0.15 kg
0
1
Inductive load (A)
Inductive load
Motor load
N.C.
N.O.
N.C.
N.O.
3
2.5
1.3
2
1.5
0.8
3
3
0.4
0.05
02
L1
Indicator light
Nil
L1
With neon light/110 VAC
L2
With neon light/220 VAC
L5
LED/24 VDC
Note) Micro load type:
Not available "L2" option.
Port size
Nil
With gasket
/
02
Rc
1
4
NPT
/
N02
1
4
ZSE„
ISE„
PSE
Z
SE3
I
PS
Z
1
SE
I
2
ZSP
ISA2
IS„
ZSM
PF2„
IF„
Data
0
IS3 10
1
Non inductive (A)
Load resistance
N.C.
N.O.
0.1
—
0.1
—
None
16-9-3
Advertisement
Related Manuals for SMC Networks IS3000 Series
Summary of Contents for SMC Networks IS3000 Series
- Page 1 For details about certified products conforming to international standards, visit us at www.smcworld.com. Pneumatic Pressure Switch IS3000 Series Model ZSE„ ISE„ Model Piping method Micro switch type Min. applicable load Can be used for micro load, IS3000-02 thread Standard 5 VDC 160 mA around 10 mA e.g.
- Page 2 IS3000 Series Construction Precautions IS3000-02/3010-02 thread) Be sure to read before handling. Refer to pages 16-14-3 to 16-14-4 for Safety Locking nut Instructions and Common Precautions on the products mentioned in this catalog, and refer to pages 16-1-11 to 16-1-13 for Precautions on every series. Wiring Warning 1.
-
Page 3: Safety Instructions
Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1) JIS B 8370 Note 2) and other safety practices. - Page 4 Common Precautions Be sure to read before handling. For detailed precautions on every series, refer to main text. 4. Use clean air Selection If the compressed air supply is contaminated with chemicals, Warning cynthetic materials, corrosive gas, etc., it may lead to break down or malfunction.
- Page 5 Quality Assurance Information (ISO 9001, ISO 14001) Reliable quality of products in the global market To enable our customers throughout SMC’s quality control system the world to use our products with even greater confidence, SMC has Make customers our first priority, offering Create new them reliable and obtained certification for international...
- Page 6 SMC Product Conforming to Inter SMC products complying with EN/ISO, CSA/UL standards are supporting CE Mark The CE mark indicates that machines and components meet essential requirements of all the EC Directives applied. It has been obligatory to apply CE marks indicating conformity with EC Directives when machines and components are exported to the member Nations of the EU.
-
Page 7: National Standards
SMC Product Conforming to International Standards national Standards you to comply with EC directives and CSA/UL standards. Mark of compliance Mark of compliance for CSA/UL for CSA í CSA Standards & UL Standards UL and CSA standards have been applied in North America (U.S.A. and Canada) symbolizing safety of electric products, and are defined to mainly prevent danger from electric shock or fire, resulting from trouble with electric products. - Page 8 SMC’s Global Service Network America Europe U.K. SMC Pneumatics (U.K.) Ltd. U.S.A. SMC Corporation of America Vincent Avenue, Crownhill, Milton Keynes, MK8 0AN, Backinghamshire, U.K. 3011 North Franklin Road Indianapolis, IN 46226, U.S.A. TEL: 01908-563888 FAX: 01908-561185 TEL: 317-899-4440 FAX: 317-899-3102 GERMANY SMC Pneumatik GmbH CANADA...
- Page 9 SMC’s Global Service Network Europe Oceania/Asia AUSTRALIA SMC Pneumatics (Australia) Pty.Ltd. FINLAND SMC Pneumatics Finland OY PL72, Tiistinniityntie 4, SF-02231 ESP00, Finland 14-18 Hudson Avenue Castle Hill NSW 2154, Australia TEL: 02-9354-8222 FAX: 02-9894-5719 TEL: 09-8595-80 FAX: 09-8595-8595 NORWAY SMC Pneumatics Norway A/S NEW ZEALAND SMC Pneumatics (New Zealand) Ltd.
Need help?
Do you have a question about the IS3000 Series and is the answer not in the manual?
Questions and answers