Cleaning The Oven Door - Electrolux EKC60351 Instruction Book

60 electrolux

Cleaning the oven door

For a more complete cleaning of the
oven door, it is advisable to disassem-
ble it in the following way:
1. open the door fully;
2. turn the two caps situated on the arm
of the hinge to 180° (diagram 1 and 2);
3. partially close the door to an angle
of 30° (diagram 3);
4. lift the door and extract from the front
(diagram 3).
Re-mount the door by reversing the
operation described above.
Models in stainless steel or alu-
minium:
We recommend to clean the oven
door using only a wet sponge and dry it
up after cleaning with a soft cloth.
Never use steel wool, acids or abra-
sive products as they can damage the
oven surface.
Clean the oven control panel follow-
ing the same precautions.
Replacing the Oven Light Replacing the Oven Light
Replacing the Oven Light Replacing the Oven Light Replacing the Oven Light
If the oven bulb needs replacing, it
must comply with the following specifi-
cations:
- Power: 15 W / 25 W,
- Voltage: 230 V (50 Hz),
- Temperature Rating of 300 °C,
- Thread type: E14.
These bulbs are available from your
local Service Force Centre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from
the electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace
with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
1
2
3