JVC BD-X200E Instructions Manual page 12

Component Names & Functions
Front Panel (continued)
9
REV button and indicator
When this button is pressed in Playback or Fast-Forward
Play mode, the DVD recorder switches to fast-reverse play.
If pressed again during fast-reverse play, the REV button
toggles the speed of fast-reverse between ×3 and ×15.
When this button is pressed in Still or Slow-Forward Play
mode, the DVD recorder switches to slow-reverse play. If
pressed again during slow-reverse play, the REV toggles
the speed of slow-reverse between ×0.5 and ×0.06.
The REV indicator is lit up during fast-reverse and slow-
reverse play.
0
STOP button
This button has the following effect when pressed in
Recording or Recording Pause mode.
If EDIT MENU from the SYSTEM MENU screen is set to
DISABLE, the DVD recorder stops recording (i.e., it
performs title closing).
If EDIT MENU from the SYSTEM MENU screen is set to
ENABLE, the DVD recorder stops recording and the
THUMBNAIL EDIT screen is displayed. It will then be
possible to modify the chapter menu.
When the STOP button is pressed in Playback mode, the
DVD recorder stops playback.
!
PLAY button and indicator
If this button is pressed together with the REC button while
a recordable disc is inserted into the DVD recorder,
recording will be started.
When the PLAY button is pressed in Recording Pause
mode, the DVD recorder restarts recording.
If a finalized disc has been inserted into the DVD recorder,
pressing of this button will start playback.
The PLAY indicator is lit up in Recording and Playback
modes.
@
FWD button and indicator
When this button is pressed in Playback or Fast-Reverse
Play mode, the DVD recorder switches to fast-forward play.
If pressed again during fast-forward play, the FWD button
toggles the speed of fast-forward between ×3 and ×15.
When this button is pressed in Still or Slow-Reverse Play
mode, the DVD recorder switches to slow-forward play. If
pressed again during slow-forward play, the FWD toggles
the speed of slow-forward between ×0.5 and ×0.06.
The FWD indicator is lit up during fast-forward and slow-
forward play.
E-10
OPERATE
AUDIO
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES REV STOP
9 0 ! @ # $ % ^
DVD RECORDER BD-X200
TITLE CHAPTER
PLAY FWD PAUSE REC TOP
MENU
#
PAUSE button and indicator
If this button is pressed during recording, the DVD recorder
switches to Recording Pause mode. A chapter mark is
inserted at the corresponding point.
If this button is pressed during playback, the DVD recorder
switches to Still mode and freezes playback. If the PAUSE
button is then pressed again in Still mode, the DVD recorder
will advance playback by a single field.
The PAUSE indicator is lit up in Recording Pause and Still
modes.
$
REC button and indicator
If this button is pressed together with the PLAY button in
Stop mode, recording will be started.
• If the current disc is blank or title closing has been carried
out, a new title will be created and recording will start at
Chapter 1.
When this button is pressed during recording, a new chapter
will be setup within the continuous video data.
If this button is pressed and held for more than 2 seconds
while the DVD recorder is stopped or inserted with no disc,
input signal encoded/decoded in MPEG will be output via
the VIDEO OUT terminal on the rear panel. This will continue
for as long as the button is held, and it allows the DVD
recording quality to be confirmed. Audio will be muted at
this time.
The REC indicator is lit up in Recording and Recording
Pause modes.
%
TOP MENU button
If this button is pressed while the DVD recorder is in a playback
condition, the current DVD's top menu (or title menu) will be
displayed on the monitor screen.
If the DVD does not contain a title menu, nothing will be
displayed when the TOP MENU button is pressed.
^
MENU button
If this button is pressed while the DVD recorder is in a playback
condition, the chapter menu for the currently selected title
will be displayed on the monitor screen.
If the DVD title does not contain a chapter menu, nothing will
be displayed when the MENU button is pressed.
BUSY
OPEN/CLOSE
)
*
OPTION DV Y/C LINE
SET UP
&
⁄
SET
MENU
¤
(