Turning The Power On & Off - JVC BD-X200E Instructions Manual

Hide thumbs Also See for BD-X200E:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Preparation
Turning the Power On & Off
OPERATE button
Turning the Power On
While in Operate Off mode (i.e., the OPERATE indicator
is lit up in red), press the OPERATE button.
The power will turn on, the colour of the OPERATE indicator
will change to green, and the DVD recorder will become
ready for use. (Operate On mode)
Note
A period of 45 seconds may pass before the DVD recorder
adopts Operate On mode as it prepares for operation.
E-24
OPERATE indicator
OPERATE
AUDIO
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES
REV
DVD RECORDER BD-X200
TITLE
CHAPTER
STOP
PLAY
FWD
PAUSE
REC
Turning the Power Off
Stop the DVD recorder.
(It is recommended that you eject the disc at this time.)
1.
Press the OPERATE button.
The DVD recorder will adopt Operate Off mode and the
colour of the OPERATE indicator will change to red.
2.
If the DVD recorder will not be used for an extended
period of time, disconnect the AC adaptor.
Before disconnecting the AC adaptor, be sure to remove
the power cord from the electrical outlet.
Notes
Pressing the OPERATE button will have no effect in
Recording mode or Recording Pause mode.
Pressing this button also has no effect during finalizing,
erasing, and dubbing.
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
SET
TOP
MENU
MENU

Advertisement

Table of Contents
loading

Table of Contents