JVC BD-X200E Instructions Manual page 74

DVD Dubbing
Dubbing DVDs Using the LAN Terminal (continued)
Dubbing
Setup Procedures
Sender device : Insert a finalized disc.
Receiver device : Insert a blank DVD.
Procedure
Use the DUBBING screen to carry out the dubbing of DVDs.
DUBBING screen
1. 2.
DUBBING
MENU
DVD † DVD
2.
DVD † DVD dubbing screen
Sender device
DVD † DVD
RECEIVER Searching . . .
SENDER IP ADDRESS † 192:168:000:002
ABORT
Receiver device
DVD † DVD
SET SENDER IP ADDRESS
192 168 000
RECEIVER IP ADDRESS † 192:168:000:003
3.
DVD † DVD
SET SENDER IP ADDRESS
192 168 000
RECEIVER IP ADDRESS † 192:168:000:003
IP address for the sender device
E-72
1.
Open the DUBBING screen on both the sender and receiver devices.
q Press the SET UP button to display the Main Setup menu.
EXECUTE
w Use the 6 and 7 buttons to select DUBBING and then press the SET
2.
On both the sender and receiver devices, set DVD † DVD from the
DUBBING screen to EXECUTE and press the SET button.
Sender device:
Receiver device:
SENDER
3.
Set the IP address for the sender device as follows.
q Use the on-screen confirmation box to set the required IP address.
RECEIVER
w If setting a new sender-device IP address, set the IP address of the sender
002 SET
RECEIVER
002 SET
Sender and receiver devices
button.
The DUBBING screen will appear.
Sender and receiver devices
Search for the receiver device. (☞ Page 73)
A confirmation box for the sender device's IP address is displayed.
To end dubbing:
Sender device : Select ABORT and press the SET button.
The normal screen display will return.
Receiver device : Press the SET UP button to return to the normal screen
display.
Receiver device
The IP address of the currently-registered sender device will be displayed.
Press the SET button to use this IP address.
device.
Use the t and 8 cursor buttons to select the digit to be changed.
Press the cursor (6/7) buttons to set the value of the selected digit.
Repeat the above for all digits, select SET using the 8/t buttons and
press the SET button.
The sender-device IP address set using this dialog box will be registered
as the most up-to-date address on the receiver device.
DVD † DVD RECEIVER
Searching . . .
ABORT
SENDER IP ADDRESS † 192:168:000:002
When all of the necessary settings have
been made, the status of the sender device
will be displayed on the receiver device's
monitor.
This screen will not appear when setting
the sender device first.