Safety Precautions; Preparing The Machine; Checking Mains Voltage; Checking The Fuse - Jura IMPRESSA 401 Instructions For Use Manual

2.2 Safety precautions

Never expose the machine to the effects of weather (rain, snow,
frost) and never operate it with your hands wet.
Place your machine on a solid and level surface. Never leave it
on a warm or hot surface (hob etc.). Choose a location that is
inaccessible for children or pets.
Remove the plug from the power socket if you are away for
some time (holidays etc.).
Always remove the plug from the power socket before cleaning.
When removing the plug from the power socket, never tug on
the cord or the machine itself.
Never repair or open the machine yourself. Repairs may only be
done by authorised service centres using original spare parts and
accessories.
The machine is connected to the mains power socket via an
electric cable. Please ensure that no-one trips over the cable and
pulls the machine down. Keep children and pets at a distance.
Never put the machine or parts of it into the dish-washer.
To prevent overheating, please put the machine in a place with a
good circulation of air.

3. Preparing the machine

3.1 Checking mains voltage

The machine has been set to the correct voltage in our factory.
Ensure that your mains voltage corresponds to the details on the
rating plate attached to the bottom of the machine.

3.2 Checking the fuse

The machine is designed for a current of 10 Amps. Please check
that a correct fuse is fitted.
8

3.3 Filling the water tank

Remove the water tank and rinse it out well with cold tap water.
Then fill the water tank and put it back into the machine. Please
ensure that the tank locks in properly.
Please only use fresh, cold water. Never fill up with milk,
mineral water and other fluids. You can also top up water
without removing the tank. Simply lift up the cover and pour
in the water from above with a vessel and close the cover
again.

3.4 Adding coffee beans

To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your Jura coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
Lift up the cover of the bean container (13) and remove the
aroma protection lid.
Clean out any dirt or foreign objects from the beam container.
Fill with coffee beans, replace the aroma protection lid and close
the cover.

3.5 Adjusting the grinder

You have the opportunity of adapting the grinder to the roast of
your coffee. We recommend the following:
for a light roasta finer adjustment
for a dark roasta coarser adjustment
Open the cover of the bean container (13).