Descaling - Jura IMPRESSA 401 Instructions For Use Manual

The symbol lights up. Place a vessel under the height-ad-
justable coffee spout (14) and press the rinsing key
After each cleaning process, the filling funnel for the 2nd
kind of coffee should be cleaned. For this purpose, remove it
from the machine. Rinse it under running hot water and put it
back in again after drying it properly.

15. Descaling

The machine has an integrated descaling programme. The descal-
ing process takes about 50 min.
Your machine does not need to be descaled if Claris filter
cartridges are used. The symbol
machine needs descaling. You can continue to draw off
coffee or hot water/steam and carry out the descaling pro-
gramme at a later stage.
Only use Jura descaling tablets, which you can obtain from
your dealer.
Only descale your machine when it has been switched off
for at least 2 hours and has cooled off properly. The
descaling programme is started with the machine switched
off. Once it has started, the descaling procedure must not be
interrupted.
If descaling agents containing acid are used, immediately
remove all splashes and drips on sensitive work surfaces, in
particular natural rock and wooden surfaces, or take cor-
responding precautionary measures.
In any case, wait until the descaling agent has been used up
and the tank is empty. Never top up descaling agent.
Remove the water tank.
.
Press the key
light up.
Empty the drip tray (1) and put it back in again.
Completely dissolve the contents of one blister pack (2 tablets)
in 0.5 litres of water in a vessel and pour the mixture into the
water tank.
Put the water tank back in. The symbols
Place a sufficiently large vessel under the pivoting nozzle for hot
water/steam (18) and turn the selector key for coffee or hot
water/steam (17) to the symbol
The automatic descaling process now starts.
lights up when your
After some time, the process is interrupted and the symbol
lights up.
Turn the selector key for coffee and hot water/steam (17) back to
the symbol
The descaling process is continued and the descaling solution is
fed to the drip tray in the interior of the machine.
After some time, the process is interrupted and the symbols
Empty the drip tray and put it back in again. Rinse the water
tank out with fresh water. Fill the water tank and put it back in
again. The symbols
Place a sufficiently large vessel under the pivoting nozzle for hot
water/steam (18) and turn the selector key for coffee or hot
water/steam (17) to the symbol
continued. The symbols
The rinsing process is interrupted after some time. The symbols
Turn the selector key for coffee or hot water/steam (17) back to
the symbol
of the machine. The symbols
for at least 2 seconds. The symbols
.
, light up and the symbol
light up, the symbol
,
and
and light up, the symbol
. The solution is fed to the drip tray in the interior
, and
, light up.
.
flashes.
flashes.
. The descaling process is
flash.
flashes.
and flash.
15
E
,